"Shour, Aloof and Obnoxious" (shour)
12/31/2016 at 17:32 • Filed to: None
0
4|
"Shour, Aloof and Obnoxious" (shour)
12/31/2016 at 17:32 • Filed to: None | 0
| 4 |
...would any of you have knowledge regarding the following?
I have bent over backwards this last week to eliminate the dreaded CEL (my reg sticker is 12/16, so I will have to late renew on Monday, hopefully). I believe that I have had all the necessary work done to eliminate the CEL; I had the O2 sensors replaced today, and the tech informed me that that they reset the CEL for me.
I seem to recall someone telling me some time ago that the TXDOT inspection process can detect if your CEL has been recently reset. It sounds reasonable, if it is true, to catch people who are cheating the system. So, I guess my question is, is this true, and if so, how much do I need to drive my car for TXDOT to not consider the CEL reset as ‘recent?’
Toby F., Manager
> Shour, Aloof and Obnoxious
12/31/2016 at 17:49 |
|
Not a Texan, but a Californian who has dealt with something similar. You’ll likely have to drive a certain amount of miles (I think it was 200 miles for me) and alternate your driving behaviors (e.g. revs, speeds) to reset your computer’s parameters after clearing your CEL and/or disconnecting the battery.
Junkrat aka Rick Sanchez: Fury Road Edition
> Toby F., Manager
12/31/2016 at 18:16 |
|
Exactly. The scanner can see if the ECU is in it’s initial setup not in learned/normal mode. I would try to drive it as much as possible before your inspection. It will probably only take a half tank or so for the ECU to re-calibrate and run in normal mode.
|
Shour, Aloof and Obnoxious
> Toby F., Manager
01/01/2017 at 01:16 |
|
Okay - thanks for the info. Appreciate it.
|
Shour, Aloof and Obnoxious
> Junkrat aka Rick Sanchez: Fury Road Edition
01/01/2017 at 01:17 |
|
Oof. Half a tank. I wonder if I can burn that with a couple hours of donuts.
Oh wait, tires. Dang it.